QC pre otpreme

Pre-shipment QC: what to check in the plant

Practical pre-shipment QC from China: AQL, packing, labels, function, report and what to do if inspection fails before the balance, and when to stop shipment.

· Papillon

Quality control · Quality · Inspection · Aql · Shipment

Pre-shipment quality control is the last inexpensive moment to find an error. After sea freight, correction in Serbia costs more through transport, duty, lost time and damaged reputation. This checklist helps produce a clear pass or fail before the balance payment and freight booking.

Why QC is not merely looking at a few pieces

In a series of 5,000 pieces, a random sample of 20 pieces is not a sufficient statistical basis. AQL, acceptable quality level, uses a random sample based on lot size with limits for critical, major and minor defects.

Agree AQL in the contract before production, not on loading day. For example, general inspection level II with AQL 1.5 for major and 4.0 for minor defects, or stricter for your category. The inspector samples across the series, not only the top of one pallet. A critical defect usually means automatic failure.

Factory QC may select a good-looking piece. Independent QC samples randomly. Both must therefore use the same brief, while dispatch follows the written result.

Before the inspector enters

Prepare:

  1. The approved reference or pre-production sample.
  2. Technical specification, drawing and bill of materials.
  3. Draft packaging and marks.
  4. Defects that automatically fail, such as sharp edges, wrong voltage or leakage.
  5. Order number, quantity by SKU and warehouse-ready date.

Without references, QC becomes personal opinion.

Quantity and identity

  • Total carton count matches the packing list
  • Units per carton are correct
  • SKU, barcode and batch marks are correct
  • Lots are not mixed without identification
  • Spare parts and instructions are counted where contracted

Visual and dimensional quality

  • Dimensions are within tolerance, measured on the sample
  • Colour matches Pantone or the approved sample under the same lighting
  • Surfaces have no scratches, stains or unevenness
  • Logo and print have the correct position, sharpness and text
  • Seams, welds and joints match the specification

Function and safety

Adapt to the category with typical checks:

  • Power-on and mechanical function
  • Fit with the complementary part
  • Electronics: voltage, connectors and basic operating test where agreed
  • Sharp edges, loose parts and relevant odour
  • Declared material, such as stainless versus ordinary steel

For regulated categories, QC does not replace certification. It checks that the series resembles what was tested.

Packaging and export readiness

  • Export packaging has agreed strength and drop testing where needed
  • Corners and edges are protected
  • Moisture protection exists for sea freight
  • Labels show product, quantity, net/gross, origin and order number
  • Palletisation and transport marks suit LCL or FCL
  • Packaging contains no materials prohibited by the buyer

Poor packaging can pass visual factory QC and still arrive damaged in Belgrade.

Documents accompanying the goods

  • Draft commercial invoice matches the goods
  • Final packing list is aligned
  • COO status is known when using the FTA, see certificate of origin
  • Test reports and declarations are attached where contracted
  • Loading photographs exist for FCL or warehouse handover for LCL

What a good QC report looks like

Request date, address and factory name, lot and sample size, AQL level, defect counts by category, photographs of each type and the overall finding, a measurement table and a conclusion: pass, fail or rework in progress.

A PDF with three pictures and no numbers is insufficient. Add signature or stamp where agreed or local practice requires.

What if QC fails

  1. Stop the balance payment where the contract links it to successful inspection.
  2. Request a rework plan and deadline.
  3. Arrange re-inspection and agree in advance who pays.
  4. Consider partial acceptance at a discount only when defects are not critical.
  5. Do not plan sorting in Serbia unless already included in landed cost.

Book the container after the expected QC window or with flexible timing. A vessel in 48 hours and failed QC must not create panic dispatch without approval. The purchase order states that shipment is permitted only after written QC pass.

Who performs QC

OptionAdvantageDisadvantage
Factory QCSpeedConflict of interest
Your employeeDirect controlTravel and language
Third party or local agentIndependenceRequires a good brief

For individual inspections: Quality control.

Photographic loading evidence

Besides product QC, request photographs of the empty container, first loading rows and seal number. The packing list must align with that seal.

For LCL, request warehouse-receipt photographs and the outbound carton count. This evidence supports a claim if cargo arrives shifted or damaged.

Process integration and conclusion

The sequence is approved sample, production, final inspection, balance payment, freight booking and dispatch. Skipping QC to catch a vessel only makes the problem arrive sooner.

Define AQL, provide the approved sample, request a measurable report and do not pay the balance on failure. This is discipline, not luxury. Full flow: import process.

For pre-shipment QC or re-inspection after rework, send order details and location via contact. We arrange timing, an SKU checklist and a pass/fail report for the dispatch decision.

Next step

Send the request: category, quantity, and date. You get a reply within 24 hours, with an outline of the total cost to destination where we can price it.